What Is a Transport Refrigeration Solution?
Transport refrigeration is the engineering and fabrication work that converts a standard vehicle chassis into a temperature-controlled vehicle that can hold perishable or temperature-sensitive product for the duration of a delivery route as part of broader industrial refrigeration and cold chain solutions. This covers the insulated body itself — PUF panel construction, flooring, doors and partitions — along with the refrigeration unit, controls and monitoring fitted to it.
Sizing matters more here than in almost any other part of the cold chain: a unit that's undersized for the route length or product load will lose pull-down capacity exactly when it's needed most, while an oversized one wastes fuel and payload space. We size the insulation and refrigeration unit together, against your actual route, product and load profile, rather than fitting a standard reefer kit regardless of what it's carrying.
What Our Transport Refrigeration Solutions Cover
Whether you are commissioning a new reefer vehicle or converting an existing one, Singhania Refrigeration's transport refrigeration scope covers your vehicle from chassis to refrigeration unit.
1. Insulated Body Fabrication (PUF Panels)
We fabricate and fit PUF (Polyurethane Foam) insulated panels to the vehicle body, sized for the temperature range the vehicle needs to hold and built to withstand the vibration and load stress of regular road use.
2. Refrigeration Unit Selection & Installation
Refrigeration units are selected and installed based on vehicle size, product type, route length and ambient conditions — so pull-down time and temperature hold match what the route actually demands, not a one-size unit fitted regardless of load.
3. Multi-Temperature & Multi-Compartment Configurations
For vehicles carrying more than one product category on a single run, we build partitioned compartments holding different temperature zones in the same vehicle, so a single delivery run can serve frozen, chilled and ambient stops without separate vehicles.
4. Insulated Doors, Curtains & Partitions
Insulated doors, strip curtains and internal partitions are fitted to minimise temperature loss during loading, unloading and multi-drop stops — the points where most in-transit temperature loss actually happens.
5. New Vehicle Builds & Existing Vehicle Conversion
We fabricate new reefer vehicles on fresh chassis as well as convert existing dry vans and trucks into insulated, refrigerated vehicles — the approach depends on your fleet plan, not a fixed format we apply regardless.
6. Controls, Monitoring & AMC
Refrigeration units are fitted with temperature controls and monitoring that connect into your broader transport tracking, with AMC covering unit servicing, insulation checks and on-road breakdown support after commissioning.
Industries & Segments We Serve
Our transport refrigeration builds support clients across temperature-sensitive distribution networks — wherever the vehicle itself needs to hold the cold chain, not just the warehouse:
Food & Beverage
Dairy, frozen foods, fruits, vegetables and ready-to-eat products on retail and HoReCa delivery routes by reefer trucks and vans.
Pharmaceuticals
Insulated vehicles that sustain validated temperature ranges for medicines, vaccines and temperature-sensitive APIs in transit.
Seafood & Meat
Frozen-rated reefer bodies and units for seafood and poultry travelling from processing facilities to distribution locations.
Horticulture & Agri
Insulated vans transporting fruit and vegetable shipments from farm-gate and CA stores to mandis and exporters.
Logistics & 3PL
Fleets of multi-temperature reefers serving a variety of customers and product categories along a shared distribution network.
Retail & FMCG
Multi-drop reefer vehicles built for scheduled delivery into the back-of-store cold rooms of supermarkets and retail chains.
Why Engineered Transport Refrigeration Over a Standard Reefer Kit?
The leading cause of in-transit temperature failures is a refrigeration unit and insulation that were never sized for the actual route, load or product — a standard kit fitted to a chassis without first checking whether it can hold the required temperature over the route length or the number of door openings on a multi-drop run.
With Singhania Refrigeration's transport refrigeration builds, you get:
- Sizing Matched to Route & Load — Insulation and refrigeration capacity are calculated against your actual route length, stop count and product load, not a standard kit applied regardless of use case.
- Lower Fuel & Maintenance Cost Over Time — Correctly sized units run more efficiently than oversized or undersized ones, reducing fuel draw and unit wear across the vehicle's working life.
- Multi-Temperature Flexibility — Partitioned compartments let a single vehicle serve mixed-temperature delivery runs, instead of requiring a separate vehicle per temperature zone.
- Built for Indian Road & Climate Conditions — Insulation, fabrication and unit selection account for ambient heat load and road conditions typical of Indian delivery routes, not a spec sheet built for a different climate.
- AMC & On-Road Support — Servicing and breakdown support continue after the vehicle is on the road, so a unit issue doesn't turn into a stranded load.
Our 5-Stage Transport Refrigeration Build Process
Every Singhania Refrigeration transport refrigeration project follows a structured process — so you always know what is happening and when.
| Stage | Phase | What Happens |
|---|---|---|
| 1 | Discovery & Vehicle Assessment | Temperature range requirement, chassis evaluation (new build or existing conversion), route length and stop-count review, product profiling |
| 2 | Design & Engineering | Insulation thickness and refrigeration unit sizing calculated together, compartment layout finalised for single or multi-temperature configurations |
| 3 | Fabrication & Panel Installation | PUF insulated body fabrication, flooring, doors, curtains and partitions fitted to the vehicle |
| 4 | Refrigeration Unit Installation & Commissioning | Refrigeration unit fitted, controls and monitoring connected, pull-down and temperature hold tested before handover |
| 5 | AMC & On-Road Support | Scheduled unit servicing, insulation checks and breakdown response to keep the vehicle running through its working life |
Why Choose Singhania Refrigeration for Transport Refrigeration?
Insulation & Unit Sized Together, Not Fitted Separately
Insulation thickness and refrigeration unit capacity are calculated as one engineering decision, so the finished vehicle holds temperature across the full route rather than falling short on longer runs.
Multi-Temperature & Multi-Compartment Expertise
Partitioned, multi-zone vehicle builds are a regular part of our scope, not a one-off request — useful for fleets serving mixed-temperature delivery runs.
New Builds & Existing Vehicle Conversion
We work on fresh chassis builds as well as converting existing dry vans and trucks, so your fleet plan — not our fixed format — decides the approach.
Deep Cold Chain Domain Knowledge
Our team also covers refrigeration engineering, cold room construction and IoT-based monitoring, so vehicle builds are informed by the same cold chain experience as our facility projects.
Delhi NCR-Based, Pan-India Reach
Located in Okhla Industrial Area, New Delhi with project execution experience in food processing clusters and pharma parks outside Delhi NCR.
Proven Across Multiple Vehicle Types
From single-temperature LCVs and delivery vans to multi-compartment trucks and trailers — we've built for the full range of reefer vehicle formats.
Energy-Efficient by Default
Refrigeration units are sized against actual load and route, never over-specified, which directly reduces fuel draw and running cost over the vehicle's life.
AMC & Ongoing Support
Unit servicing, insulation checks and breakdown response continue after the vehicle is on the road, not only during fabrication.
Frequently Asked Questions
Ready to Build or Convert Your Reefer Fleet?
Tell us your vehicle type, route length and product range — and we'll assess your need and propose a defined build scope and timeline. No obligation. No pressure.
Call: +91 99710 60822 Call: +91 97180 97170